Specifications:
-Input Voltage: 115V/230V AC
-Output Voltage: 12V DC
-Output Current: 0~29.2A
-Protection: Shortage Protection, Overload Protection, Over Voltage Protection
-Weight: 660g
-Size: 215*114*50mm
-Shell Material: Aluminum
-Safety Compliance: FCC / CE
-Connection:
-L, N: AC power input
-COM: DC power output in-in
-V: DC power output in+in
-+V / ADJ: Adjust the output voltage (10%)
Notice:
1. In USA,Canada, the voltage switch of the power supply should be set to 110/115. Setting the power supply voltage switch to the incorrect input voltage may damage the power supply
2.The unit can work long hours at this current and good cooling environment. The actual output current depends on circuit loads
3.DO NOT let the unit work long hours over rated current! Work under 80% of rated currency
4.Dust the switcher out every 2 or 3 months if necessary
5.Even with EMI/RFI filter built inside, still not suitable for a hamradio operator connecting with radio or wireless communication equipments.
6. Do not power the unit before wire connection and voltage adjustment
7. IN-DOOR USE ONLY! This Unit inDOES NOTin comes with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
Low cost shipping in both Canada and the US.
New in open package. Tested and guaranteed to work.
-Input Voltage: 115V/230V AC
-Output Voltage: 12V DC
-Output Current: 0~29.2A
-Protection: Shortage Protection, Overload Protection, Over Voltage Protection
-Weight: 660g
-Size: 215*114*50mm
-Shell Material: Aluminum
-Safety Compliance: FCC / CE
-Connection:
-L, N: AC power input
-COM: DC power output in-in
-V: DC power output in+in
-+V / ADJ: Adjust the output voltage (10%)
Notice:
1. In USA,Canada, the voltage switch of the power supply should be set to 110/115. Setting the power supply voltage switch to the incorrect input voltage may damage the power supply
2.The unit can work long hours at this current and good cooling environment. The actual output current depends on circuit loads
3.DO NOT let the unit work long hours over rated current! Work under 80% of rated currency
4.Dust the switcher out every 2 or 3 months if necessary
5.Even with EMI/RFI filter built inside, still not suitable for a hamradio operator connecting with radio or wireless communication equipments.
6. Do not power the unit before wire connection and voltage adjustment
7. IN-DOOR USE ONLY! This Unit inDOES NOTin comes with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.
Low cost shipping in both Canada and the US.
New in open package. Tested and guaranteed to work.
